FodderTech Commercial Series
The FodderTech Commercial Series is designed to grow between 125 lbs to 20,000+ lbs in incremental racks of 250 lbs of sprouts every day up to the volume desired. FodderTech designs have been perfected for quality over the last 15 years. The FodderTech designs have significant advantages over other designs.
All FodderTech systems offer the following advantages:
- Mold Guard Technology
- Grow 10″ – 12″ thick sprouts with up to 3″ thick root mat
- Operate and maintain entirely indoors
- Operate without exposing sprouts to ambient temperature
- No sprays system
- Access to sprouts during every stage of growth
- Designed for easy seeding, harvesting and maintenance. Harvest 1 ton of sprouts in less than 1 hour.
- Energy efficient designs – R-28 insulation
- Recirulating water system
- Made in the USA
The sprouting professionals
Thicker, Taller, Lusher: There is no substitute for quality. FodderTech sprouts are 10″ – 12″ tall in 8 days. The root mat develops between 2″ – 3″ thick. Other systems would grow sprouts to 4″ – 8″ tall sprouts with less than 1″ thick root mat. The root mat is saturated in sucrose, fructose, glucose, and energy. The taller sprouts and thicker root mat offers unique nutritional advantages that shorter sprouts cannot deliver.
Optimal Controls: Sprouts are sensitive to climate. When operating a FodderTech sprouting system the sprouts are never exposed to ambient temperature as the system must be installed in a climate controlled room/facility. Systems that expose the sprouts to ambient and air and sunlight during operation are inefficient, will likely stunt the plant growth, and require chemicals to control the mold.
No Sprays: Spraying plants from above increases humidity and mold potential during sprouting. Strong chemicals like chlorine being sprayed in the building will cause corrosion to aluminum and galvanized steel racks. FodderTech systems do not use sprays to irrigate the sprouts.
Wide Aisles: Access to the sprouts through the every growth stage is important for troubleshooting, seeding, harvesting, operation, maintenance and cleaning is critical. If there is no access and mold grows then it will spread. FodderTech systems offer wide aisles with access to days 1 – 7 of the sprouting process.
Recirculating Water System: The FodderTech designs use a recirculating water system. These designs allow operators to condition the water for optimal growing conditions. This allows growers to maximize the amount feed from each pound of seed.
Made in the USA: Sprouting systems for animal feed are available from around the globe. FodderTech is owned and operated from the United States. All fabrication for U.S. models is done in the U.S.